HRS Ferritic · SS410HC Coils AISI Coils Supplier

Stainless Steel 410HC Coils
AISI 410HC Coils

High-Carbon Martensitic Grade · Exceptional Toughness & Wear Resistance · Heat Treatable · Global Supply Solutions

AISI 410HC UNS S41000 EN 1.4006 SUS 410
📋 Table of Contents
1Introduction to SS 410HC
2What are SS 410HC Coils?
3Metallurgical Characteristics
4Specifications
5Available Stock
6Types of SS 410HC Coil
7Chemical Properties
8Mechanical Properties
9Pricing Information
10Equivalent Grades
11FAQs
HRS Ferritic · SS 410HC Importer, Supplier & Stockist

SS 410HC Coils /
AISI 410HC Coils

HRS Ferritic is a well-known brand in the industry of stainless steel. We specialize in ferritic as well as martensitic steel grades that are suitable for tough industrial applications. As a reputable company, SS410HC Coils AISI Coils Supplier, Stainless Steel 410HC Stockist and AISI 410HC Coils Importer, we offer top-quality materials that are sourced from reliable and reputable manufacturers.

  • High carbon content for maximum hardness
  • Excellent wear and abrasion resistance
  • Heat treatable (Quench & Temper)
  • Moderate corrosion resistance
  • Superior dimensional stability
  • Robust supply chain and global delivery
Stainless Steel 410HC Coils
HCHigh Carbon
Grade Overview

What are SS 410HC Coils? AISI Coils 410HC?

SS Coils 410HC are martensitic stainless steel high-carbon coils with increased toughness, hardness, and wear resistance compared to standard 410. They are employed in high-stress applications requiring strength and abrasion resistance.

11.5–13.5%
Chromium Content
Martensitic
Microstructure
480–760
Tensile Strength MPa
0.5–100
Thickness Range mm
Composition Analysis

Metallurgical Characteristics of SS 410HC / AISI 410HC Coils

The high carbon content and martensitic structure deliver exceptional mechanical durability and strength.

Fe
Iron
Base metal forming the martensitic structure, providing strength and hardness.
Cr
Chromium
Enhances corrosion resistance and contributes to hardenability and wear resistance.
C
Carbon
Higher than standard 410, increases hardness and strength, suitable for heat treatment.
Mn
Manganese
Improves toughness and assists in strength during heat treatment.
Si
Silicon
Increases strength and helps with oxidation resistance at elevated temperatures.
Ni
Nickel
Minimal presence; may slightly improve corrosion resistance and toughness.
P
Phosphorus
Residual element; levels are controlled as too much may reduce toughness.
S
Sulfur
Controlled to improve machinability without compromising mechanical properties.
Technical Data

Specifications for SS 410HC Coils/ AISI Coils 410HC

Martensitic Stainless Steel · High Carbon · Heat Treatable

Specification Details
ASTM / AISI ASTM A240 / AISI 410HC (Plate, Sheet, and Strip)
UNS UNS S41000
EN / DIN EN 1.4006 / DIN 1.4006
ISO ISO X12Cr13
JIS SUS 410
Product Form Sheets / Coils / Plates
Thickness Range 0.5 mm to 100 mm
Standard Widths 1000, 1219, 1250, 1500, 1800, 2000, 2500, 3000, 3500 mm
Standard Lengths 2000, 2440, 2500, 3000, 5800, 6000 mm
Surface Finish Hot Rolled (HR), Cold Rolled (CR), Annealed & Pickled (AP)
Supply Condition Solution Annealed
Cutting Methods Plasma, Laser, Waterjet, Oxy Propane
Packaging Bundled, Wooden Plates, Bubble wraps, Customized
Inventory

Available Stock & Product Forms

🌀

Coils & Strips

Slitting coils, perforated coils, and thin foils from 0.05 mm available in stock.

📄

Sheets & Plates

Precision sheets, heavy plates, and shim sheets in various thicknesses.

✂️

Custom Cut

Circles, rings, custom-cut blanks, and chequered (tread) plates per specification.

📐

Edge Options

Available in Mill edge, slit edge, round edge, and square edge conditions.

🧪

Chromium (Cr)

11.5–13.5% — Provides moderate corrosion resistance and hardenability.

⚫

Carbon (C)

0.15–0.30% — High carbon variant for superior hardness and wear resistance.

✨

Manganese (Mn)

≤ 1.0% — Contributes to toughness and structural strength.

⚖️

Iron (Fe)

Balance — Base metal forming the essential martensitic structure.

💪

Tensile Strength

480–760 MPa — Exceptional strength after specialized heat treatment.

🎯

Yield Strength

≥ 275 MPa — High yield point for demanding structural components.

📏

Elongation

≥ 15% — Adequate ductility maintained despite high hardness.

🔬

Hardness

≤ 235 HB — (Annealed) Optimized for machinability before final hardening.

Application Sectors

Industries We Serve

Sugar
Sugar Industry
Global cane and beet processing requiring thermal endurance.
Power
Power Industry
Electricity generation and distribution systems.
Ship Building
Ship Building
Marine propulsion and exhaust components.
Mechanical
Mechanical & Plant Engineering
Industrial machinery design solutions.
Food
Food, Beverage & Dairy
Processed food manufacturing environments.
Oil Gas
Oil & Gas Plant
Refinery furnace units and burner assemblies.
Product Range

Types of SS 410HC Coils/ AISI Coils 410HC

As a reliable Coils SS 410HC / AISI Coils stockist and Importer, we maintain diverse stock to meet industrial needs.

Hot Rolled Coils SS 410HC
Cold Rolled Coils SS 410HC
Annealed SS 410HC Coils
Hardened and Tempered SS 410HC Coils
Slit SS Coils 410HC Coils
Custom Width/Length Cut Coils
Application Sectors

Applications of SS Coils 410HC / AISI Coils 410HC

Fertilizer
Fertilizer Industry
Utilized for conveyor components such as mixing blades, valve parts, and wear-resistant liners.
Chemical
Chemical Processing
Pumpshafts, agitator blades, fasteners and pressure vessel parts working under extreme stress.
Aerospace
Aerospace
Structural brackets, fasteners, actuator components, and ground support equipment requiring durability.
Oil Gas
Oil & Gas Sector
Used in pumps, valves, drills, and flanges where durability and resistance to wear are essential.
Pharmaceutical
Pharmaceuticals
Frames for equipment, non-contact mechanical components, drive shafts and components needing cleanability.
Automobile
Automotive Industry
Gear components, brake parts, clutch plates, shafts, and high-strength brackets where hardness is vital.
Chemical Composition

Chemical Properties of SS Coils 410HC

The balanced chemical composition of 410HC allows for excellent response to heat treatment and mechanical durability.

Element Composition (%)
Carbon (C) 0.15 – 0.30
Chromium (Cr) 11.5 – 13.5
Manganese (Mn) ≤ 1.0
Silicon (Si) ≤ 1.0
Phosphorus (P) ≤ 0.04
Sulfur (S) ≤ 0.03
Iron (Fe) Balance
Performance Data

Mechanical Property of SS Coils 410HC or AISI Coils 410HC

480–760
Tensile Strength
MPa — Superior physical strength for high-stress wear
≥ 275
Yield Strength
MPa — Robust yield resistance for mechanical components
≥ 15%
Elongation
Maintains ductility for specialized forming processes
≤ 235 HB
Hardness
Annealed condition — Excellent wear and abrasion resistance
Cost Information

Price List for SS 410HC Coils/ AISI Coils 410HC

Price Influencers

What affects the cost?

  • Market prices of carbon and chromium
  • Requirements for specialized heat treatment
  • Coil thickness, width, and dimensional tolerances
  • Surface finishing and processing steps
  • Order volume and delivery location
  • Raw material price fluctuations
Get Pricing Today
Get A Quote!
Find the best grade at the right cost — Contact HRS for a fast estimate
📧 info@hrsferritic.com
International Standards

Equivalent grades for SS Coils 410HC or AISI Coils 410HC

SS 410HC is recognized globally under various standards, ensuring versatility in international projects.

Standard / Country Equivalent Grade / Designation
AISI (USA) 410HC
UNS (USA) S41000
ASTM / ASME ASTM A240 / ASME SA240 Type 410 HC
EN (Europe) 1.4006 / X12Cr13
DIN (Germany) X12Cr13
BS (UK) 410S21 / 410S29
JIS (Japan) SUS 410
AFNOR (France) Z12C13
GOST (Russia) 12Х13
GB (China) 1Cr13 / 12Cr13
ISO ISO 1.4006 / X12Cr13
UNI (Italy) X12Cr13
SS (Sweden) SS 2302
KS (Korea) Equivalent to SUS 410
IS (India) SS 410HC / 410
📦
Ready Stock & Product Forms
  • Flat Products: Precision sheets, heavy plates, shim sheets
  • Coils & Strips: Slitting coils, perforated coils, thin foils from 0.05 mm
  • Speciality Forms: Circles, rings, custom-cut blanks, chequered plates
  • Edge Conditions: Mill edge, slit edge, round edge, square edge
🏭
Quality Assurance & Logistics
  • Testing: PMI, Ultrasonic Testing (UT), Radiography (RT), corrosion testing
  • Certification: EN 10204 3.1 / 3.2, NACE compliance (on request)
  • Global Supply: USA, UAE, Saudi Arabia, Singapore, Indonesia, Europe
  • Export Packaging: ISPM-15 wooden crates, shrink-wrapped & moisture-protected
Use Cases

Applications and the importance of SS Coils 410HC / AISI Coils 410HC

🌾 Fertilizer Industry
Conveyor mixing blades, valve components, and wear-resistant liners for abrasion protection.
🧪 Chemical Processing
Pumpshafts, agitator blades, and fasteners working under extreme stress and moderate corrosion.
✈️ Aerospace
Structural brackets, fasteners, and actuator components requiring durability and stability.
⛽ Oil & Gas
Pumps, valves, drills, and flanges where durability and resistance to wear are essential.
💊 Pharmaceuticals
Frames for equipment, mechanical component housings, and drive shafts needing durability.
🏗️ Construction & Infrastructure
Frames, reinforcement components, fasteners, and brackets for load-bearing purposes.
⚡ EV & Electrical
Enclosures for motor shafts, support brackets, and mechanical housings requiring heat resistance.
🚗 Automotive
Gear components, brake parts, clutch plates, shafts, and high-strength brackets.
Why HRS Ferritic

Why choose HRS Ferritic for SS 410HC Coils/AISI 410HC Coils?

HRS Ferritic is a quality-driven stainless steel producer that specializes in martensitic and ferritic grades. With industry-specific expertise and a global supply chain, we provide reliable stainless steel solutions with complete traceability and expert technical support.

Reliable SS 410HC Coils Supplier & Stockist
Large inventory and rapid global dispatch
Material sourced from highly valuable mills
Competitive pricing and bulk supply options
Customized dimensions and heat treatment
Globally strong import and export capability
Complete EN 10204 3.1 / 3.2 documentation
Guaranteed quality of supply for 20+ countries
🇮🇳

Cities We Supply In India

New Delhi · Ahmedabad · Jaipur · Surat · Salem · Gandhinagar · Varanasi · Haldia · Bhiwandi · Tiruppur · Jamnagar · Thiruvananthapuram · Rajahmundry · Visakhapatnam · Bhubaneswar · Vijaywada · Rajkot · Bharuch · Coimbatore · Nagpur · Raipur · Cochin · Ludhiana · Panipat · Durgapur · Agra
🌍

Countries We Export To

Saudi Arabia · Qatar · Canada · Sri Lanka · Iran · Nigeria · Bangladesh · Oman · UAE · Turkey · Kuwait · Venezuela · Africa · Singapore · Netherlands · United Kingdom · Mexico · Malaysia · United States · Australia · Japan
Support

Frequently Asked Questions

Quick answers to common queries about Stainless Steel 410HC Coils.

SS 410HC coils are high-carbon martensitic stainless steel coils offering improved strength and hardness compared to standard 410, ideal for wear-resistant and heat-resistant applications.
Thicker SS 410HC coils cost more because they require greater material volume and more energy and time in rolling and processing.
SS 410HC coils are commonly used in cutlery, blades, valve parts, and wear-resistant machinery components where high hardness and moderate corrosion resistance are needed.
Yes, premium finishes like bright annealed or polished surfaces raise costs due to additional finishing steps, surface treatments, and inspection.
HRS Ferritic
Direct message to HRS Ferritic via whatsapp